WOLFRAM SYSTEM MODELER
VesselFluidPorts_bFluid connector with outlined, large icon to be used for horizontally aligned vectors of FluidPorts (vector dimensions must be added after dragging) |
 |
Wolfram Language
In[1]:=
SystemModel["Modelica.Fluid.Vessels.BaseClasses.VesselFluidPorts_b"]
Out[1]:=
Connector Variables (4)
| p |
Causality: None Type: AbsolutePressure (Pa) Description: Thermodynamic pressure in the connection point |
|---|---|
| h_outflow |
Causality: None Type: SpecificEnthalpy (J/kg) Description: Specific thermodynamic enthalpy close to the connection point if m_flow < 0 |
| Xi_outflow |
Causality: None Type: MassFraction[Medium.nXi] (kg/kg) Description: Independent mixture mass fractions m_i/m close to the connection point if m_flow < 0 |
| C_outflow |
Causality: None Type: ExtraProperty[Medium.nC] Description: Properties c_i/m close to the connection point if m_flow < 0 |
Flow Variables (1)
| m_flow |
Type: MassFlowRate (kg/s) Description: Mass flow rate from the connection point into the component |
|---|
Used in Components (2)
 |
Modelica.Fluid.Examples.AST_BatchPlant.BaseClasses Tank with inlet/outlet ports and with inlet ports at the top |
 |
Modelica.Fluid.Vessels.BaseClasses Lumped volume with a vector of fluid ports and replaceable heat transfer model |