WOLFRAM SYSTEM MODELER
FlangeOne-dimensional rotational flange |
Wolfram Language
In[1]:=
SystemModel["Modelica.Mechanics.Rotational.Interfaces.Flange"]
Out[1]:=
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This is a connector for 1D rotational mechanical systems. It has no icon definition and is only used by inheritance from flange connectors to define different icons.
The following variables are defined in this connector:
phi: Absolute rotation angle of the flange in [rad]. tau: Cut-torque in the flange in [Nm].
Connector Variables (1)
| phi |
Causality: None Type: Angle (rad) Description: Absolute rotation angle of flange |
|---|
Flow Variables (1)
| tau |
Type: Torque (N⋅m) Description: Cut torque in the flange |
|---|
Extended by (3)
 |
Modelica.Mechanics.Rotational.Interfaces Support/housing flange of a one-dimensional rotational shaft |
 |
Modelica.Mechanics.Rotational.Interfaces One-dimensional rotational flange of a shaft (non-filled circle icon) |
 |
Modelica.Mechanics.Rotational.Interfaces One-dimensional rotational flange of a shaft (filled circle icon) |