WOLFRAM SYSTEM MODELER

PartialRelativeSensor

Device to measure a single relative variable between two flanges

Wolfram Language

In[1]:=
SystemModel["Modelica.Mechanics.Translational.Interfaces.PartialRelativeSensor"]
Out[1]:=

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

This is a superclass for 1D translational components with two rigidly connected flanges and one output signal in order to measure relative kinematic quantities between the two flanges or the cut-force in the flange and to provide the measured signal as output signal for further processing with the Modelica.Blocks blocks.

Connectors (2)

flange_a

Type: Flange_a

Description: (left) driving flange (flange axis directed into cut plane, e. g. from left to right)

flange_b

Type: Flange_b

Description: (right) driven flange (flange axis directed out of cut plane)

Extended by (6)

MultiSensor

Modelica.Mechanics.Translational.Sensors

Ideal sensor to measure the absolute velocity, force and power between two flanges

PowerSensor

Modelica.Mechanics.Translational.Sensors

Ideal sensor to measure the power between two flanges (= flange_a.f*der(flange_a.s))

ForceSensor

Modelica.Mechanics.Translational.Sensors

Ideal sensor to measure the force between two flanges

RelAccSensor

Modelica.Mechanics.Translational.Sensors

Ideal sensor to measure the relative acceleration

RelSpeedSensor

Modelica.Mechanics.Translational.Sensors

Ideal sensor to measure the relative speed

RelPositionSensor

Modelica.Mechanics.Translational.Sensors

Ideal sensor to measure the relative position