WOLFRAM SYSTEM MODELER
FluidPort_aFluid connector with filled icon |
SystemModel["Modelica.Media.Examples.Utilities.FluidPort_a"]
This information is part of the Modelica Standard Library maintained by the Modelica Association.
Modelica.Media.Examples.Tests.Components.FluidPort_ap |
Causality: None Type: AbsolutePressure (Pa) Description: Pressure in the connection point |
---|---|
h |
Causality: None Type: SpecificEnthalpy (J/kg) Description: Specific mixture enthalpy in the connection point |
Xi |
Causality: None Type: MassFraction[Medium.nXi] (kg/kg) Description: Independent mixture mass fractions m_i/m in the connection point |
C |
Causality: None Type: ExtraProperty[Medium.nC] Description: Properties c_i/m in the connection point |
m_flow |
Type: MassFlowRate (kg/s) Description: Mass flow rate from the connection point into the component |
---|---|
H_flow |
Type: EnthalpyFlowRate (W) Description: Enthalpy flow rate into the component (if m_flow > 0, H_flow = m_flow*h) |
mXi_flow |
Type: MassFlowRate[Medium.nXi] (kg/s) Description: Mass flow rates of the independent substances from the connection point into the component (if m_flow > 0, mX_flow = m_flow*X) |
mC_flow |
Type: ExtraPropertyFlowRate[Medium.nC] (kg/s) Description: Flow rates of auxiliary properties from the connection point into the component (if m_flow > 0, mC_flow = m_flow*C) |
Modelica.Media.Examples.Utilities Fixed volume associated with a port by the finite volume method |
|
Modelica.Media.Examples.Utilities Simple pressure loss in pipe |