WOLFRAM SYSTEM MODELER
RelTemperatureSensorTemperature difference sensor |
SystemModel["Modelica.Thermal.FluidHeatFlow.Sensors.RelTemperatureSensor"]
This information is part of the Modelica Standard Library maintained by the Modelica Association.
The RelTemperatureSensor measures the temperature difference between flowPort_a and flowPort_b.
Thermodynamic equations are defined by Interfaces.RelativeSensorBase.
Note: Connected flowPorts have the same temperature (mixing temperature)! Since mixing my occur, the outlet temperature of a component may be different from the connector's temperature. Outlet temperature is defined by variable T of the corresponding component.
medium |
Value: FluidHeatFlow.Media.Medium() Type: Medium Description: Sensor's medium |
---|
flowPort_a |
Type: FlowPort_a Description: Filled flow port (used upstream) |
|
---|---|---|
flowPort_b |
Type: FlowPort_b Description: Hollow flow port (used downstream) |
|
y |
Type: RealOutput Description: Temperature difference as output signal |
medium |
Type: Medium Description: Sensor's medium |
---|