WOLFRAM SYSTEM MODELER

Sensors

Ideal sensors to measure port properties

Package Contents

PressureSensor

Absolute pressure sensor

TemperatureSensor

Absolute temperature sensor

RelPressureSensor

Pressure difference sensor

RelTemperatureSensor

Temperature difference sensor

MassFlowSensor

Mass flow sensor

VolumeFlowSensor

Volume flow sensor

EnthalpyFlowSensor

Enthalpy flow sensor

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

This package contains sensors:

  • PressureSensor: absolute pressure
  • TemperatureSensor: absolute temperature (Kelvin)
  • RelPressureSensor: pressure drop between flowPort_a and flowPort_b
  • RelTemperatureSensor: temperature difference between flowPort_a and flowPort_b
  • MassFlowSensor: measures mass flow rate
  • VolumeFlowSensor: measures volume flow rate
  • EnthalpyFlowSensor: measures enthalpy flow rate

Some of the sensors do not need access to medium properties for measuring, but it is necessary to define the medium in the connector (check of connections). Thermodynamic equations are defined in partial models (package BaseClasses). All sensors are considered massless, they do not change mass flow or enthalpy flow.

Wolfram Language

In[1]:=
SystemModel["Modelica.Thermal.FluidHeatFlow.Sensors"]
Out[1]:=