WOLFRAM SYSTEMMODELER
IsolatedValveIsolated valve |
 |
Wolfram Language
In[1]:=
SystemModel["SmartCooling.Components.IsolatedValve"]
Out[1]:=
Information
This model represents an isolated valve considering pressure loss. The component is modeled using the following partial models: SmartCooling.Interfaces.TwoPort and SmartCooling.Interfaces.PrescibedPressureLoss. This model does not consider any heat exchange with the environment.
Parameters (7)
| medium |
Value: SmartCooling.Medium.Medium() Type: Medium Description: medium type |
|---|---|
| m |
Value: Type: Mass (kg) Description: medium mass |
| TStart |
Value: Type: Temperature (K) Description: medium initial temperature |
| m_flowNom |
Value: Type: MassFlowRate (kg/s) Description: nominal mass flow |
| dpNom |
Value: Type: Pressure (Pa) Description: nominal pressure loss |
| m_flowNomLeak |
Value: Type: MassFlowRate (kg/s) Description: nominal leak mass flow |
| characteristic |
Value: true Type: Boolean Description: if true then linear else quadratic |
Connectors (3)
 |
flowPort_a |
Type: FlowPort_a Description: flow port a |
|---|---|---|
 |
flowPort_b |
Type: FlowPort_b Description: flow port b |
 |
state |
Type: RealInput |
Components (1)
 |
medium |
Type: Medium Description: medium type |
|---|
Used in Components (1)
 |
SmartCooling.Components
Thermostat with first order delay |