WOLFRAM SYSTEMMODELER
TwoPortTwo port fluid transport partial model |
 |
Wolfram Language
In[1]:=
SystemModel["SmartCooling.Interfaces.TwoPort"]
Out[1]:=
Information
This model represents a partial model with two fluid ports called fluidPort_a and fluidPort_b. The possible heat exchange with the ambience or a component is implemented using the heatFlow variable Q_flow, and the fluid temperatures T_a and T_b.
Parameters (3)
| medium |
Value: SmartCooling.Medium.Medium() Type: Medium Description: medium type |
|---|---|
| m |
Value: Type: Mass (kg) Description: medium mass |
| TStart |
Value: Type: Temperature (K) Description: medium initial temperature |
Connectors (2)
 |
flowPort_a |
Type: FlowPort_a Description: flow port a |
|---|---|---|
 |
flowPort_b |
Type: FlowPort_b Description: flow port b |
Components (1)
 |
medium |
Type: Medium Description: medium type |
|---|
Extended by (11)
 |
SmartCooling.Components
Pump in a circuit system |
 |
SmartCooling.Components
Medium volume flow component |
 |
SmartCooling.Components
Medium velocity inflow component |
 |
SmartCooling.Components
Medium pressure component |
 |
SmartCooling.Components
Medium mass flow component |
 |
SmartCooling.Components
Isolated valve |
 |
SmartCooling.Components
Isolated pipe |
 |
SmartCooling.Components
Pipe with a heat port connector |
 |
SmartCooling.Components
Fan in a circuit system |
 |
SmartCooling.Components
Pipe with convection and two surface heat ports |
 |
SmartCooling.Components
Pipe with convection |