WOLFRAM

Wolfram 语言与系统参考资料中心

BlockchainTokenData (for bloxberg)

BlockchainTokenData["name"]

给出有关在 bloxberg 区块链上使用具有指定名称的通证的信息.

BlockchainTokenData["sym"]

给出符号为 sym 的通证的信息.

BlockchainTokenData["address"]

给出与指定地址关联的通证的信息.

BlockchainTokenData[assoc]

给出属性与 assoc 中的指定匹配的通证的信息.

BlockchainTokenData[tokenspec,prop]

给出通证用法的指定属性.

更多信息

  • BlockchainTokenData 给出关联列表，每个关联给出一个通证的结果.
  • 在 BlockchainTokenData["name"] 中，name 可以是分配给特定通证的名称（如 "Ethernity Token"），也可以是一类通证的标准（如 "ERC721"）.
  • tokenspec 输入可指代任意输入，String name、symbol、address 或 Association assoc 都可以.
  • 在 BlockchainTokenData[assoc] 中，关联 assoc 中的元素可以有以下键：
  • "Name"通证的名称（如 "Tronix"）
    "Symbol"通证的符号（如 "CK"）
    "TokenAddress"与通证关联的地址
    "TokenStandard"定义通证的标准（如 "ERC20")
    "TimeInterval"要包含哪个时间段的交易
    "BlockNumberInterval"应包含其交易的区块
    "Addresses"转账的发送者或接收者的地址
    "SenderAddresses"转账的发送者的地址
    "ReceiverAddresses"转账的接收者的地址
    "HolderAddresses"当前通证持有者的地址
  • 输入关联中任何省略的键被视为可取任何值. 这相当于将键和值指定为 "key"->All.
  • 可用具有指定粒度的单个 DateObject 给出"TimeInterval"，也可以用开始-结束日期对象列表给出.
  • BlockchainTokenData 的可能选项包括：
  • BlockchainBase $BlockchainBase要使用的区块链和网络
    MaxItems 20最多返回多少项
  • MaxItems 的设置指定了结果中最多包含多少个持有者、多少次转账和多少个发送者地址及接收者地址.
  • BlockchainTokenData[tokenspec] 以关联形式给出通证的信息，含有以下元素：
  • "Name"通证的名称
    "Symbol"通证的符号
    "TokenAddress"与通证关联的地址
    "TokenStandard"定义通证的标准
    "TotalSupply"通证现有的总供应量
    "TransferPrecision"通证的精度的位数（只针对 "ERC20"）
    "HoldersCount"当前通证持有者的数量
    "AddressesCount"已收到通证的地址的总数
    "TransfersCount"通证已进行的总转移次数
  • 此外，输入关联 assoc 中给出元素 "HolderAddresses" 时，BlockchainTokenData[assoc] 返回以下属性：
  • "Name"通证的名称
    "Symbol"通证的符号
    "TokenAddress"与通证关联的地址
    "TokenStandard"定义通证的标准
    "TransfersCount"给定持有人对通证已进行的总转移次数
    "Balance"持有者的余额
    "HolderTokenIDs"当前持有者持有的通证的 ID 列表（只针对 "ERC721"）
    "BalanceFraction"持有人持有的部分占总供应量的比例
  • 输入关联 assoc 中给出元素 "TimeInterval"、"BlockNumberInterval"、"Addresses"、"SenderAddresses" 或 "ReceiverAddresses" 时，BlockchainTokenData[assoc] 返回以下属性：
  • "Name"通证的名称
    "TokenStandard"定义通证的标准
    "TransactionID"交易哈希，其中包括通证的转移
    "BlockNumber"含有该交易的区块的编号
    "Time" 区块的时间戳
    "Sender"通证的发送者
    "Receiver"通证的接收者
    "Amount"发送的通证的数量（只针对 "ERC20"）
    "TokenID"发送的通证的 ID（只针对 "ERC721"）
  • BlockchainTokenData[tokenspec,prop] 还支持以下其他属性：
  • "HolderList"当前通证的持有者，持有最多的为第一个
    "TransferList"通证的转移，先列出最新的
    "SenderAddressList"通证所有发送者的地址
    "ReceiverAddressList"通证所有接收者的地址
  • 输入关联 tokenspec 中给出元素 "TimeInterval"、"BlockNumberInterval"、"Addresses"、"SenderAddresses" 或 "ReceiverAddresses" 时，这些属性则不可用.
  • 输入关联 tokenspec 中给出元素 "HolderAddresses" 时，属性 "HolderList" 不可用.
  • "HolderList" 的值是一个关联列表，其中的键如下所示：
  • "HolderAddress"持有者的地址
    "Balance"持有者的余额
    "BalanceFraction"持有人持有的部分占总供应量的比例
  • "TransferList" 的值是一个关联列表，其中的键如下所示：
  • "TransactionID"交易哈希，其中包括通证的转移
    "BlockNumber"含有该交易的区块的编号
    "Time" 区块的时间戳
    "Sender"通证的发送者
    "Receiver"通证的接收者
    "Amount"发送的通证的数量（只针对 "ERC20"）
    "TokenID"发送的通证的 ID（只针对 "ERC721"）
  • BlockchainTokenData[tokenspec,{prop1,prop2,…}] 在每个关联中包含 propi.

范例

打开所有单元 关闭所有单元

基本范例  (13)

根据名称查看特定通证的信息：

Wolfram Language code: BlockchainTokenData["Ethernity Token", BlockchainBase -> "Bloxberg"]//Dataset

根据符号查看特定通证的信息：

Wolfram Language code: BlockchainTokenData["ETNY", BlockchainBase -> "Bloxberg"]//Dataset

根据通证的地址查看特定通证的信息：

Wolfram Language code: BlockchainTokenData["2B2b454b9689fa3e3A7c015e43a30a47b2FA2698", BlockchainBase -> "Bloxberg"]//Dataset

列出所有的 "ERC20" 通证：

Wolfram Language code: BlockchainTokenData["ERC20", BlockchainBase -> "Bloxberg"]//Dataset

获取 X 通证现有的总供应量：

Wolfram Language code: BlockchainTokenData["X", "TotalSupply", BlockchainBase -> "Bloxberg"]

获取 X 通证的多个属性：

Wolfram Language code: BlockchainTokenData["X", {"Symbol", "TokenStandard", "TransfersCount"}, BlockchainBase -> "Bloxberg"]

按区块过滤通证的转移：

Wolfram Language code: BlockchainTokenData[<|"Name" -> "Ethernity Token", "BlockNumberInterval" -> {5000000, 6650000}|>, BlockchainBase -> "Bloxberg", MaxItems -> 10]//Dataset

按时间过滤通证的转移：

Wolfram Language code: BlockchainTokenData[<|"Name" -> "Ethernity Token", "TimeInterval" -> {DateObject[{2020, 1, 25, 15, 25, 50.}, "Instant", "Gregorian", -5.], DateObject[{2020, 3, 25, 15, 25, 50.}, "Instant", "Gregorian", -5.]}|>, BlockchainBase -> "Bloxberg", MaxItems -> 10]//Dataset

按发送者的地址过滤通证的转移：

Wolfram Language code: BlockchainTokenData[<|"Name" -> "X", "SenderAddresses" -> "737756B173D2F41D63a46Ed6094DAF7E8a78F997"|>, BlockchainBase -> "Bloxberg", MaxItems -> 10]//Dataset

按接收者的地址过滤通证的转移：

Wolfram Language code: BlockchainTokenData[<|"Name" -> "X", "ReceiverAddresses" -> "514c557bc87559168b0D1CEf1199310cBB463bfB"|>, BlockchainBase -> "Bloxberg", MaxItems -> 10]//Dataset

按地址过滤所有 "ERC20" 通证的转移，不管是发送者地址还是接收者地址：

Wolfram Language code: BlockchainTokenData[<|"TokenStandard" -> "ERC20", "Addresses" -> "514c557bc87559168b0D1CEf1199310cBB463bfB"|>, BlockchainBase -> "Bloxberg", MaxItems -> 10]//Dataset

对特定持有者持有的所有 "ERC20" 通证进行过滤：

Wolfram Language code: BlockchainTokenData[<|"TokenStandard" -> "ERC20", "HolderAddresses" -> "5f9Adb7DB7dcdb7C6cE8DF7742cb40D4bc6607a0"|>, BlockchainBase -> "Bloxberg"]//Dataset

获取当前 5 个 B 通证的持有者：

Wolfram Language code: BlockchainTokenData[<|"Name" -> "B"|>, "HolderList", BlockchainBase -> "Bloxberg", MaxItems -> 5]//Dataset

范围  (51)

AddressesCount  (1)

获取已接收到通证的地址的总数：

Wolfram Language code: BlockchainTokenData["X", "AddressesCount", BlockchainBase -> "Bloxberg"]

Amount  (5)

获取一定时间段内发送的 ERC-20 通证的数量：

Wolfram Language code: BlockchainTokenData[<|"Name" -> "Ethernity Token", "TimeInterval" -> {DateObject[{2020, 1, 25, 15, 25, 50.}, "Instant", "Gregorian", -5.], DateObject[{2020, 3, 25, 15, 25, 50.}, "Instant", "Gregorian", -5.]}|>, "Amount", BlockchainBase -> "Bloxberg", MaxItems -> 10]

获取按发送者的地址过滤的发送的 ERC-20 通证的数量：

Wolfram Language code: BlockchainTokenData[<|"Name" -> "X", "SenderAddresses" -> "737756B173D2F41D63a46Ed6094DAF7E8a78F997"|>, "Amount", BlockchainBase -> "Bloxberg", MaxItems -> 10]

获取按接收者的地址过滤的发送的 ERC-20 通证的数量：

Wolfram Language code: BlockchainTokenData[<|"Name" -> "C", "ReceiverAddresses" -> "514c557bc87559168b0D1CEf1199310cBB463bfB"|>, "Amount", BlockchainBase -> "Bloxberg", MaxItems -> 5]
Wolfram Language code: BlockchainTokenData[<|"Name" -> "B", "Addresses" -> "234c38746459Eca01804F2207B0E5627225F4dcE"|>, "Amount", BlockchainBase -> "Bloxberg", MaxItems -> 5]

获取在区块间隔内发送的 ERC-20 通证的数量：

Wolfram Language code: BlockchainTokenData[<|"Name" -> "Ethernity Token", "BlockNumberInterval" -> {5000000, 6650000}|>, "Amount", BlockchainBase -> "Bloxberg", MaxItems -> 5]

Balance  (1)

获取持有者地址的余额：

Wolfram Language code: BlockchainTokenData[<|"Name" -> "X", "HolderAddresses" -> "514c557bc87559168b0D1CEf1199310cBB463bfB"|>, "Balance", BlockchainBase -> "Bloxberg"]

BalanceFraction  (1)

获取持有人持有的部分占总供应量的比例：

Wolfram Language code: BlockchainTokenData[<|"Name" -> "X", "HolderAddresses" -> "514c557bc87559168b0D1CEf1199310cBB463bfB"|>, "BalanceFraction", BlockchainBase -> "Bloxberg"]

BlockNumber  (5)

获取一定时间段内含有通证交易的的区块：

Wolfram Language code: BlockchainTokenData[<|"Name" -> "Ethernity Token", "TimeInterval" -> {DateObject[{2020, 1, 25, 15, 25, 50.}, "Instant", "Gregorian", -5.], DateObject[{2020, 3, 25, 15, 25, 50.}, "Instant", "Gregorian", -5.]}|>, "BlockNumber", BlockchainBase -> "Bloxberg", MaxItems -> 10]

获取含有某个发送者地址的通证交易的的区块：

Wolfram Language code: BlockchainTokenData[<|"Name" -> "X", "SenderAddresses" -> "737756B173D2F41D63a46Ed6094DAF7E8a78F997"|>, "BlockNumber", BlockchainBase -> "Bloxberg", MaxItems -> 10]

获取含有某个接收者地址的通证交易的的区块：

Wolfram Language code: BlockchainTokenData[<|"Name" -> "C", "ReceiverAddresses" -> "514c557bc87559168b0D1CEf1199310cBB463bfB"|>, "BlockNumber", BlockchainBase -> "Bloxberg", MaxItems -> 10]
Wolfram Language code: BlockchainTokenData[<|"Name" -> "X", "Addresses" -> "737756B173D2F41D63a46Ed6094DAF7E8a78F997"|>, "BlockNumber", BlockchainBase -> "Bloxberg", MaxItems -> 10]

获取在区块间隔内含有通证交易的区块：

Wolfram Language code: BlockchainTokenData[<|"Name" -> "Ethernity Token", "BlockNumberInterval" -> {5000000, 6650000}|>, "BlockNumber", BlockchainBase -> "Bloxberg", MaxItems -> 10]

HolderList  (1)

查看与特定通证最相关的持有者：

Wolfram Language code: BlockchainTokenData["X", "HolderList", BlockchainBase -> "Bloxberg", MaxItems -> 10]//Dataset

HoldersCount  (1)

获取目前持有某个通证的总人数：

Wolfram Language code: BlockchainTokenData["X", "HoldersCount", BlockchainBase -> "Bloxberg"]

HolderTokenIDs  (1)

获取当前持有人持有的通证 ID 的列表：

Wolfram Language code: BlockchainTokenData[<|"TokenStandard" -> "ERC721", "TokenAddress" -> "C37cFA5Db1685fe1C83764596e37f7ea6511b917", "HolderAddresses" -> "aA84378fA41da83a9B6523bA46E45A664FbEBFC8"|>, "HolderTokenIDs", BlockchainBase -> "Bloxberg"]

Name  (1)

获取通证的名称：

Wolfram Language code: BlockchainTokenData["ETNY", "Name", BlockchainBase -> "Bloxberg"]

Receiver  (5)

按时间段过滤，获取通证的接收者：

Wolfram Language code: BlockchainTokenData[<|"Name" -> "Ethernity Token", "TimeInterval" -> {DateObject[{2020, 1, 25, 15, 25, 50.}, "Instant", "Gregorian", -5.], DateObject[{2020, 3, 25, 15, 25, 50.}, "Instant", "Gregorian", -5.]}|>, "Receiver", BlockchainBase -> "Bloxberg", MaxItems -> 5]

按发送者地址过滤，获取通证的接收者：

Wolfram Language code: BlockchainTokenData[<|"Name" -> "X", "SenderAddresses" -> "737756B173D2F41D63a46Ed6094DAF7E8a78F997"|>, "Receiver", BlockchainBase -> "Bloxberg", MaxItems -> 5]

按接收者地址过滤，"Receiver" 属性返回同样的地址：

Wolfram Language code: BlockchainTokenData[<|"Name" -> "X", "ReceiverAddresses" -> "514c557bc87559168b0D1CEf1199310cBB463bfB"|>, "Receiver", BlockchainBase -> "Bloxberg", MaxItems -> 5]
Wolfram Language code: BlockchainTokenData[<|"Name" -> "X", "Addresses" -> "514c557bc87559168b0D1CEf1199310cBB463bfB"|>, "Receiver", BlockchainBase -> "Bloxberg", MaxItems -> 5]

按区块间隔过滤，获取通证的接收者：

Wolfram Language code: BlockchainTokenData[<|"Name" -> "Ethernity Token", "BlockNumberInterval" -> {5000000, 6650000}|>, "Receiver", BlockchainBase -> "Bloxberg", MaxItems -> 5]

ReceiverAddressList  (1)

查看特定通证最后一个接收者的地址：

Wolfram Language code: Tally[First[BlockchainTokenData["ETNY", "ReceiverAddressList", BlockchainBase -> "Bloxberg"]]]

Sender  (5)

按时间段过滤，获取通证的发送者：

Wolfram Language code: BlockchainTokenData[<|"Name" -> "Ethernity Token", "TimeInterval" -> {DateObject[{2020, 1, 25, 15, 25, 50.}, "Instant", "Gregorian", -5.], DateObject[{2020, 3, 25, 15, 25, 50.}, "Instant", "Gregorian", -5.]}|>, "Sender", BlockchainBase -> "Bloxberg", MaxItems -> 5]

按发送者地址过滤，"Sender" 属性返回同样的地址：

Wolfram Language code: BlockchainTokenData[<|"Name" -> "X", "SenderAddresses" -> "737756B173D2F41D63a46Ed6094DAF7E8a78F997"|>, "Sender", BlockchainBase -> "Bloxberg", MaxItems -> 5]

按接收者地址过滤，获取通证的发送者：

Wolfram Language code: BlockchainTokenData[<|"Name" -> "X", "ReceiverAddresses" -> "514c557bc87559168b0D1CEf1199310cBB463bfB"|>, "Sender", BlockchainBase -> "Bloxberg", MaxItems -> 5]
Wolfram Language code: BlockchainTokenData[<|"Name" -> "X", "Addresses" -> "514c557bc87559168b0D1CEf1199310cBB463bfB"|>, "Sender", BlockchainBase -> "Bloxberg", MaxItems -> 5]

按区块间隔过滤，获取通证的发送者：

Wolfram Language code: BlockchainTokenData[<|"Name" -> "Ethernity Token", "BlockNumberInterval" -> {5000000, 6650000}|>, "Sender", BlockchainBase -> "Bloxberg", MaxItems -> 5]

SenderAddressList  (1)

查看特定通证最后一个发送者的地址：

Wolfram Language code: First[BlockchainTokenData["ETNY", "SenderAddressList", BlockchainBase -> "Bloxberg"]]

Symbol  (1)

获取通证的符号：

Wolfram Language code: BlockchainTokenData["Ethernity Token", "Symbol", BlockchainBase -> "Bloxberg"]

Time  (5)

按时间段过滤，获取与通证关联的区块的时间戳：

Wolfram Language code: BlockchainTokenData[<|"Name" -> "Ethernity Token", "TimeInterval" -> {DateObject[{2020, 1, 25, 15, 25, 50.}, "Instant", "Gregorian", -5.], DateObject[{2020, 3, 25, 15, 25, 50.}, "Instant", "Gregorian", -5.]}|>, "Time", BlockchainBase -> "Bloxberg", MaxItems -> 5]

按发送者地址过滤，获取与通证关联的区块的时间戳：

Wolfram Language code: BlockchainTokenData[<|"Name" -> "X", "SenderAddresses" -> "737756B173D2F41D63a46Ed6094DAF7E8a78F997"|>, "Time", BlockchainBase -> "Bloxberg", MaxItems -> 5]

按接收者地址过滤，获取与通证关联的区块的时间戳：

Wolfram Language code: BlockchainTokenData[<|"Name" -> "X", "ReceiverAddresses" -> "514c557bc87559168b0D1CEf1199310cBB463bfB"|>, "Time", BlockchainBase -> "Bloxberg", MaxItems -> 5]
Wolfram Language code: BlockchainTokenData[<|"Name" -> "X", "Addresses" -> "514c557bc87559168b0D1CEf1199310cBB463bfB"|>, "Time", BlockchainBase -> "Bloxberg", MaxItems -> 5]

按区块间隔过滤，获取与通证关联的区块的时间戳：

Wolfram Language code: BlockchainTokenData[<|"Name" -> "Ethernity Token", "BlockNumberInterval" -> {5000000, 6650000}|>, "Time", BlockchainBase -> "Bloxberg", MaxItems -> 5]

TokenAddress  (1)

获取通证的地址：

Wolfram Language code: BlockchainTokenData["X", "TokenAddress", BlockchainBase -> "Bloxberg"]

TokenID  (5)

按时间段过滤，获取发送的 ERC-721 通证的 ID：

Wolfram Language code: BlockchainTokenData[<|"TokenAddress" -> "C37cFA5Db1685fe1C83764596e37f7ea6511b917", "TimeInterval" -> {DateObject[{2020, 1, 25, 15, 25, 50.}, "Instant", "Gregorian", -5.], DateObject[{2020, 3, 25, 15, 25, 50.}, "Instant", "Gregorian", -5.]}|>, "TokenID", BlockchainBase -> "Bloxberg", MaxItems -> 5]

按发送者地址过滤，获取发送的 ERC-721 通证的 ID：

Wolfram Language code: BlockchainTokenData[<|"TokenAddress" -> "C37cFA5Db1685fe1C83764596e37f7ea6511b917", "SenderAddresses" -> "0000000000000000000000000000000000000000"|>, "TokenID", BlockchainBase -> "Bloxberg", MaxItems -> 5]

按接收者地址过滤，获取发送的 ERC-721 通证的 ID：

Wolfram Language code: BlockchainTokenData[<|"TokenAddress" -> "C37cFA5Db1685fe1C83764596e37f7ea6511b917", "ReceiverAddresses" -> "aA84378fA41da83a9B6523bA46E45A664FbEBFC8"|>, "TokenID", BlockchainBase -> "Bloxberg", MaxItems -> 5]
Wolfram Language code: BlockchainTokenData[<|"TokenAddress" -> "C37cFA5Db1685fe1C83764596e37f7ea6511b917", "Addresses" -> "aA84378fA41da83a9B6523bA46E45A664FbEBFC8"|>, "TokenID", BlockchainBase -> "Bloxberg", MaxItems -> 5]

按区块间隔过滤，获取发送的 ERC-721 通证的 ID：

Wolfram Language code: BlockchainTokenData[<|"TokenAddress" -> "C37cFA5Db1685fe1C83764596e37f7ea6511b917", "BlockNumberInterval" -> {5000000, 6650000}|>, "TokenID", BlockchainBase -> "Bloxberg", MaxItems -> 5]

TokenStandard  (1)

获取通证的标准：

Wolfram Language code: BlockchainTokenData["ETNY", "TokenStandard", BlockchainBase -> "Bloxberg"]

TotalSupply  (1)

获取通证的总供应量：

Wolfram Language code: BlockchainTokenData["ETNY", "TotalSupply", BlockchainBase -> "Bloxberg"]

TransactionID  (5)

按时间段过滤，获取交易的哈希，其中包括通证的转移：

Wolfram Language code: BlockchainTokenData[<|"Name" -> "Ethernity Token", "TimeInterval" -> {DateObject[{2020, 1, 25, 15, 25, 50.}, "Instant", "Gregorian", -5.], DateObject[{2020, 3, 25, 15, 25, 50.}, "Instant", "Gregorian", -5.]}|>, "TransactionID", BlockchainBase -> "Bloxberg", MaxItems -> 5]

按发送者地址过滤，获取交易的哈希，其中包括通证的转移：

Wolfram Language code: BlockchainTokenData[<|"Name" -> "X", "SenderAddresses" -> "737756B173D2F41D63a46Ed6094DAF7E8a78F997"|>, "TransactionID", BlockchainBase -> "Bloxberg", MaxItems -> 5]

按接收者地址过滤，获取交易的哈希，其中包括通证的转移：

Wolfram Language code: BlockchainTokenData[<|"Name" -> "X", "ReceiverAddresses" -> "514c557bc87559168b0D1CEf1199310cBB463bfB"|>, "TransactionID", BlockchainBase -> "Bloxberg", MaxItems -> 5]
Wolfram Language code: BlockchainTokenData[<|"Name" -> "X", "Addresses" -> "514c557bc87559168b0D1CEf1199310cBB463bfB"|>, "TransactionID", BlockchainBase -> "Bloxberg", MaxItems -> 5]

按区块间隔过滤，获取交易的哈希，其中包括通证的转移：

Wolfram Language code: BlockchainTokenData[<|"Name" -> "Ethernity Token", "BlockNumberInterval" -> {5000000, 6650000}|>, "TransactionID", BlockchainBase -> "Bloxberg", MaxItems -> 5]

TransferList  (1)

查看特定通证最新的转移：

Wolfram Language code: BlockchainTokenData["X", "TransferList", BlockchainBase -> "Bloxberg", MaxItems -> 10]//Dataset

TransferPrecision  (1)

获取通证的精度的位数：

Wolfram Language code: BlockchainTokenData["ETNY", "TransferPrecision", BlockchainBase -> "Bloxberg"]

TransfersCount  (1)

获取通证已进行的总转移次数：

Wolfram Language code: BlockchainTokenData["ETNY", "TransfersCount", BlockchainBase -> "Bloxberg"]

选项  (2)

BlockchainBase  (1)

Bloxberg  (1)

列出所有 "ERC20" 通证：

Wolfram Language code: BlockchainTokenData["ERC20", BlockchainBase -> "Bloxberg"]//Dataset

MaxItems  (1)

获取按区块间隔过滤得到的 5 个通证交易的信息：

Wolfram Language code: BlockchainTokenData[<|"Name" -> "Ethernity Token", "BlockNumberInterval" -> {5000000, 6650000}|>, BlockchainBase -> "Bloxberg", MaxItems -> 5]//Dataset

巧妙范例  (1)

根据使用量创建通证的词云：

Wolfram Language code: WordCloud[BlockchainTokenData[All, {"Name", "TransfersCount"}, BlockchainBase -> "Bloxberg"]]
Wolfram Research (2020)，BlockchainTokenData，Wolfram 语言函数，https://reference.wolfram.com/language/ref/blockchain/BlockchainTokenData-bloxberg.html.

文本

Wolfram Research (2020)，BlockchainTokenData，Wolfram 语言函数，https://reference.wolfram.com/language/ref/blockchain/BlockchainTokenData-bloxberg.html.

CMS

Wolfram 语言. 2020. "BlockchainTokenData." Wolfram 语言与系统参考资料中心. Wolfram Research. https://reference.wolfram.com/language/ref/blockchain/BlockchainTokenData-bloxberg.html.

APA

Wolfram 语言. (2020). BlockchainTokenData. Wolfram 语言与系统参考资料中心. 追溯自 https://reference.wolfram.com/language/ref/blockchain/BlockchainTokenData-bloxberg.html 年

BibTeX

@misc{reference.wolfram_2026_blockchaintokendata, author="Wolfram Research", title="{BlockchainTokenData}", year="2020", howpublished="\url{https://reference.wolfram.com/language/ref/blockchain/BlockchainTokenData-bloxberg.html}", note=[Accessed: 10-August-2026]}

BibLaTeX

@online{reference.wolfram_2026_blockchaintokendata, organization={Wolfram Research}, title={BlockchainTokenData}, year={2020}, url={https://reference.wolfram.com/language/ref/blockchain/BlockchainTokenData-bloxberg.html}, note=[Accessed: 10-August-2026]}