WOLFRAM SYSTEM MODELER

LogicalSwitch

Logical Switch

Wolfram Language

In[1]:=
SystemModel["Modelica.Blocks.Logical.LogicalSwitch"]
Out[1]:=

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

The LogicalSwitch switches, depending on the Boolean u2 connector (the middle connector), between the two possible input signals u1 (upper connector) and u3 (lower connector).

If u2 is true, connector y is set equal to u1, else it is set equal to u3.

Connectors (4)

u1

Type: BooleanInput

Description: Connector of first Boolean input signal
u2

Type: BooleanInput

Description: Connector of second Boolean input signal
u3

Type: BooleanInput

Description: Connector of third Boolean input signal
y

Type: BooleanOutput

Description: Connector of Boolean output signal

Used in Components (2)

PartialLogicalClock

Modelica.Clocked.ClockSignals.Clocks.Logical

Logical clock combining arbitrary many input clock signals according to a replaceable logical combinator

SwitchedCapacitor

Modelica.Electrical.Analog.Examples.Utilities

Switched capacitor which can represent a positive or negative resistance