WOLFRAM SYSTEM MODELER
AIMC_DOLTest example: AsynchronousInductionMachineSquirrelCage direct-on-line |
 |
Diagram
Wolfram Language
In[1]:=
SystemModel["Modelica.Electrical.Machines.Examples.AsynchronousInductionMachines.AIMC_DOL"]
Out[1]:=
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
At start time tStart three phase voltage is supplied to the asynchronous induction machine with squirrel cage; the machine starts from standstill, accelerating inertias against load torque quadratic dependent on speed, finally reaching nominal speed.
Simulate for 1.5 seconds and plot (versus time):
- currentQuasiRMSSensor.I: stator current RMS
- aimc.wMechanical: motor's speed
- aimc.tauElectrical: motor's torque
Default machine parameters are used.
Parameters (7)
| VNominal |
Value: 100 Type: Voltage (V) Description: Nominal RMS voltage per phase |
|---|---|
| fNominal |
Value: 50 Type: Frequency (Hz) Description: Nominal frequency |
| tStart1 |
Value: 0.1 Type: Time (s) Description: Start time |
| TLoad |
Value: 161.4 Type: Torque (N·m) Description: Nominal load torque |
| wLoad |
Value: 1440.45 * 2 * Modelica.Constants.pi / 60 Type: AngularVelocity (rad/s) Description: Nominal load speed |
| JLoad |
Value: 0.29 Type: Inertia (kg·m²) Description: Load's moment of inertia |
| aimcData |
Value: Type: AIM_SquirrelCageData |
Components (11)
 |
aimc |
Type: AIM_SquirrelCage |
|---|---|---|
 |
currentQuasiRMSSensor |
Type: CurrentQuasiRMSSensor |
 |
sineVoltage |
Type: SineVoltage |
 |
star |
Type: Star |
 |
ground |
Type: Ground |
 |
booleanStep |
Type: BooleanStep[m] |
 |
idealCloser |
Type: IdealClosingSwitch |
 |
loadInertia |
Type: Inertia |
 |
quadraticLoadTorque | |
 |
terminalBox |
Type: TerminalBox |
 |
aimcData |
Type: AIM_SquirrelCageData |