WOLFRAM SYSTEM MODELER

PartialElementaryOneFlangeAndSupport2

Partial model for a component with one rotational 1-dim. shaft flange and a support used for textual modeling, i.e., for elementary models

Wolfram Language

In[1]:=
SystemModel["Modelica.Mechanics.Rotational.Interfaces.PartialElementaryOneFlangeAndSupport2"]
Out[1]:=

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

This is a 1-dim. rotational component with one flange and a support/housing. It is used to build up elementary components of a drive train with equations in the text layer.

If useSupport=true, the support connector is conditionally enabled and needs to be connected.
If useSupport=false, the support connector is conditionally disabled and instead the component is internally fixed to ground.

Parameters (1)

useSupport

Value: false

Type: Boolean

Description: = true, if support flange enabled, otherwise implicitly grounded

Connectors (2)

flange

Type: Flange_b

Description: Flange of shaft

support

Type: Support

Description: Support/housing of component

Extended by (8)

PartialTorque

Modelica.Mechanics.Rotational.Interfaces

Partial model of a torque acting at the flange (accelerates the flange)

Torque

Modelica.Mechanics.Rotational.Sources

Input signal acting as external torque on a flange

Move

Modelica.Mechanics.Rotational.Sources

Forced movement of a flange according to an angle, speed and angular acceleration signal

Accelerate

Modelica.Mechanics.Rotational.Sources

Forced movement of a flange according to an acceleration signal

Speed

Modelica.Mechanics.Rotational.Sources

Forced movement of a flange according to a reference angular velocity signal

Position

Modelica.Mechanics.Rotational.Sources

Forced movement of a flange according to a reference angle signal

SinCosResolver

Modelica.Electrical.Machines.Sensors

Sin-Cos-Resolver

HallSensor

Modelica.Electrical.Machines.Sensors

Hall sensor