WOLFRAM SYSTEM MODELER
Tandem4PortBasic building block for directional control valves |
 |
Diagram
Wolfram Language
In[1]:=
SystemModel["Hydraulic.Valves.DirectionalControl.Internal.States.Tandem4Port"]
Out[1]:=
Information
This model is a basic building block for directional control valves. When the input signal is 1, ports p-t are connected.
Parameters (6)
| medium |
Value: Oil() Type: Medium Description: Medium in the component |
|---|---|
| Gleak |
Value: 9.999999999999999e-21 Type: PressureDependentLeakage (m³/(s·Pa)) Description: Leakage between orifices |
| overlap |
Value: 0 Type: Length (m) Description: A number between -1 and 1; 0 if no overlap |
| AMax |
Value: 0.0001 Type: Area (m²) Description: Maximum opening area |
| Cd |
Value: 0.62 Type: Real Description: Coefficient of discharge for the opening |
| k |
Value: 1 Type: Real Description: Gain parameter for control signal u |
Connectors (5)
Components (3)
 |
medium |
Type: Medium Description: Medium in the component |
|---|---|---|
 |
gain |
Type: Gain |
 |
flow_pt |
Type: ControlledOrifice |
Used in Components (1)
 |
Hydraulic.Valves.DirectionalControl.Internal Partial valve with four ports and three states |