WOLFRAM SYSTEM MODELER
PCVE42Electrically actuated proportional control valve with four ports and two states |
 |
Diagram
Wolfram Language
In[1]:=
SystemModel["Hydraulic.Valves.DirectionalControl.ProportionalSolenoidActuation.PCVE42"]
Out[1]:=
Information
This is a model of a control valve with four ports and two states. The valve has a tank port t, a pressure port p, and two load ports a and b. The insignal to the spool is u. The valve is controlled by an electrical spool with dynamics; see SpoolP2Windings.
Control valve with four ports and two states
Valve with no overlap at the center position. At the center position, there is flow from a to t and from p to b.
Valve at left position, u = 1; there is flow from p to a and from b to t
Control valve with four ports and two states
Valve with no overlap at the center position. At the center position, there is flow from a to t and from p to b.
Valve at left position, u = 1; there is flow from p to a and from b to t
Implementation
This valve basically consists of orifices controlled by a spool.Parameters (9)
| medium |
Value: Oil() Type: Medium Description: Medium in the component |
|---|---|
| V |
Value: 0.0001 Type: Volume (m³) Description: Volume of control valve |
| Gleak |
Value: 1e-020 Type: PressureDependentLeakage (m³/(s·Pa)) Description: Leakage between orifices |
| overlap |
Value: 0 Type: Length (m) Description: Spool overlap, a number between -1 and 1; 0 if no overlap |
| AMax |
Value: 0.001 Type: Area (m²) Description: Maximum opening area |
| Cd |
Value: 0.62 Type: Real Description: Coefficient of discharge for the opening |
| Un |
Value: 1 Type: Voltage (V) Description: Spool nominal voltage |
| d |
Value: 0.9 Type: Damping (s⁻¹) Description: Spool damping |
| f |
Value: 80 Type: Frequency (Hz) Description: Spool resonance frequency |
