WOLFRAM SYSTEM MODELER
PressureCompensatingValveNormallyClosedPressure valve, controlled by the pressure difference between the ports |
 |
Diagram
Wolfram Language
In[1]:=
SystemModel["Hydraulic.Valves.PressureControl.PressureCompensatingValveNormallyClosed"]
Out[1]:=
Information
This is a model of a pressure compensating valve with lumped volumes. If the pressure difference between the opening and closing pilot ports is higher than pMin, the valve starts to open. When the pressure difference reaches pMax, the valve is fully open. The spool model has first-order dynamics with time constant t1.
Implementation
This valve basically consists of an orifice controlled by a spool.Parameters (8)
| medium |
Value: Oil() Type: Medium Description: Medium in the component |
|---|---|
| V |
Value: 0.0001 Type: Volume (m³) Description: Volume of control valve |
| Gleak |
Value: 9.999999999999999e-21 Type: PressureDependentLeakage (m³/(s⋅Pa)) Description: Leakage between ports |
| pMax |
Value: 21000000.0 Type: Pressure (Pa) Description: Pressure when valve is fully opened |
| pMin |
Value: 20000000.0 Type: Pressure (Pa) Description: Pressure when valve starts to open |
| t1 |
Value: 0.01 Type: Time (s) Description: Time constant for first-order system |
| AMax |
Value: 0.001 Type: Area (m²) Description: Maximum opening area |
| Cd |
Value: 0.62 Type: Real Description: Coefficient of discharge for the opening |
Connectors (4)
Components (4)
 |
medium |
Type: Medium Description: Medium in the component |
|---|---|---|
 |
pressureCompensatingValve |
Type: PressureCompensatingValveNormallyClosed Description: Static pressure compensating valve |
 |
volume_a |
Type: Volume Description: Fixed volume with fluid storage |
|
volume_b |
Type: Volume Description: Fixed volume with fluid storage |
Used in Components (1)
 |
Hydraulic.Valves.FlowControl Assembly with a restriction and a pressure compensating valve |