WOLFRAM SYSTEM MODELER
SMPM_VoltageSourceTest example: PermanentMagnetSynchronousMachine fed by FOC |
 |
Diagram
Wolfram Language
In[1]:=
SystemModel["Modelica.Electrical.Machines.Examples.SynchronousMachines.SMPM_VoltageSource"]
Out[1]:=
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
A synchronous machine with permanent magnets accelerates a quadratic speed dependent load from standstill. The rms values of d- and q-current in rotor fixed coordinate system are controlled by the dqCurrentController, and the output voltages fed to the machine. The result shows that the torque is influenced by the q-current, whereas the stator voltage is influenced by the d-current.
Default machine parameters are used.
Parameters (5)
| Idq |
Value: {-53.5, 84.6} Type: Current[2] (A) Description: Desired d- and q-current |
|---|---|
| wNominal |
Value: 2 * pi * smpmData.fsNominal / smpmData.p Type: AngularVelocity (rad/s) Description: Nominal speed |
| TLoad |
Value: 181.4 Type: Torque (N⋅m) Description: Nominal load torque |
| JLoad |
Value: 0.29 Type: Inertia (kg⋅m²) Description: Load's moment of inertia |
| smpmData |
Value: Type: SM_PermanentMagnetData Description: Synchronous machine data |
Components (20)
 |
smpm |
Type: SM_PermanentMagnet Description: Permanent magnet synchronous machine |
|---|---|---|
 |
signalVoltage |
Type: SignalVoltage Description: Polyphase signal voltage source |
 |
star |
Type: Star Description: Star-connection |
 |
ground |
Type: Ground Description: Ground node |
 |
iq |
Type: Constant Description: Generate constant signal of type Real |
|
id |
Type: Constant Description: Generate constant signal of type Real |
 |
terminalBox |
Type: TerminalBox Description: Terminal box Y/D-connection |
 |
inertiaLoad |
Type: Inertia Description: 1D-rotational component with inertia |
 |
quadraticSpeedDependentTorque |
Type: QuadraticSpeedDependentTorque Description: Quadratic dependency of torque versus speed |
 |
currentSensor |
Type: CurrentSensor Description: Polyphase current sensor |
 |
dqCurrentController |
Type: DQCurrentController Description: Current controller in dq coordinate system |
 |
multiSensor |
Type: MultiSensor Description: Ideal sensor to measure the torque and power between two flanges (= flange_a.tau*der(flange_a.phi)) and the absolute angular velocity |
 |
rotorDisplacementAngle |
Type: RotorDisplacementAngle Description: Rotor lagging angle |
|
groundM |
Type: Ground Description: Ground node |
|
starM |
Type: Star Description: Star-connection |
 |
voltageQuasiRMSSensor |
Type: VoltageQuasiRMSSensor Description: Length of space phasor -> RMS voltage |
 |
smpmData |
Type: SM_PermanentMagnetData Description: Synchronous machine data |
 |
currentQuasiRMSSensor |
Type: CurrentQuasiRMSSensor Description: Length of space phasor -> RMS current |
 |
sinCosResolver |
Type: SinCosResolver Description: Sin-Cos-Resolver |
 |
sinCosEvaluation |
Type: SinCosEvaluation Description: Evaluation of the signals of a sin-cos-resolver |