WOLFRAM SYSTEM MODELER
SMPM_VoltageSourceTest example: PermanentMagnetSynchronousInductionMachine fed by FOC |
 |
Diagram
Wolfram Language
In[1]:=
SystemModel["Modelica.Magnetic.FundamentalWave.Examples.BasicMachines.SMPM_VoltageSource"]
Out[1]:=
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
A synchronous induction machine with permanent magnets accelerates a quadratic speed dependent load from standstill. The rms values of d- and q-current in rotor fixed coordinate system are controlled by the voltageController, and the output voltages fed to the machine. The result shows that the torque is influenced by the q-current, whereas the stator voltage is influenced by the d-current.
Default machine parameters are used
Parameters (5)
| Idq |
Value: {-53.5, 84.6} Type: Current[2] (A) Description: Desired d- and q-current |
|---|---|
| wNominal |
Value: 2 * pi * smpmData.fsNominal / smpmData.p Type: AngularVelocity (rad/s) Description: Nominal speed |
| TLoad |
Value: 181.4 Type: Torque (N·m) Description: Nominal load torque |
| JLoad |
Value: 0.29 Type: Inertia (kg·m²) Description: Load's moment of inertia |
| smpmData |
Value: Type: SM_PermanentMagnetData |
Components (20)
 |
smpm |
Type: SM_PermanentMagnet |
|---|---|---|
 |
signalVoltage |
Type: SignalVoltage |
 |
star |
Type: Star |
 |
ground |
Type: Ground |
 |
iq |
Type: Constant |
|
id |
Type: Constant |
 |
terminalBox |
Type: TerminalBox |
 |
angleSensor |
Type: AngleSensor |
 |
inertiaLoad |
Type: Inertia |
 |
quadraticSpeedDependentTorque | |
 |
currentSensor |
Type: CurrentSensor |
 |
voltageController |
Type: VoltageController |
 |
torqueSensor |
Type: TorqueSensor |
 |
speedSensor |
Type: SpeedSensor |
 |
rotorDisplacementAngle |
Type: RotorDisplacementAngle |
|
groundM |
Type: Ground |
|
starM |
Type: Star |
 |
voltageQuasiRMSSensor |
Type: VoltageQuasiRMSSensor |
 |
smpmData |
Type: SM_PermanentMagnetData |
 |
currentQuasiRMSSensor |
Type: CurrentQuasiRMSSensor |