WOLFRAM SYSTEM MODELER
ForceDynamicClass with a static force and a rotating force; this component can be used when the rotating force is NOT the unbalance force |
 |
Diagram
Wolfram Language
In[1]:=
SystemModel["RotatingMachinery.Examples.ContactAnalysis.ClampedRotor.ForceDynamic"]
Out[1]:=
Information
Dynamic Force
Component that can add forces in 3D and rotate. The forces can be individually controlled in time interval and amplitude, defined by ramp signals. To stop applying a force, the step signal in the desired direction is activated, multiplying the force amplitude by zero.
Figure 1: Applied force
Parameters (5)
| height |
Value: {10000, 10000, 0} Type: Real[3] Description: Amplitude of the force applied in x,y,z direction |
|---|---|
| start |
Value: {10, 10, 20} Type: Real[3] Description: Time when to start applying a force in x,y,z direction |
| duration |
Value: {10, 0, 0} Type: Real[3] Description: Duration of the ramp in x,y,z direciton |
| offset |
Value: {0, 0, 0} Type: Real[3] Description: Offset of amplitude in x,y,z direction |
| animation |
Value: true Type: Boolean Description: = true, if animation of force arrow should be enabled |
Connectors (1)
 |
frame_b |
Type: Frame_b Description: Coordinate system fixed to the component with one cut-force and cut-torque (non-filled rectangular icon) |
|---|
Components (10)
 |
force_Static |
Type: WorldForce Description: External force acting at frame_b, defined by 3 input signals and resolved in frame world, frame_b or frame_resolve |
|---|---|---|
 |
rampz |
Type: Ramp Description: Generate ramp signal |
 |
productz |
Type: Product Description: Output product of the two inputs |
 |
stepz |
Type: Step Description: Generate step signal of type Real |
|
productx |
Type: Product Description: Output product of the two inputs |
|
rampx |
Type: Ramp Description: Generate ramp signal |
|
stepx |
Type: Step Description: Generate step signal of type Real |
 |
sine |
Type: Sine Description: Generate sine signal |
 |
cosine |
Type: Cosine Description: Generate cosine signal |
 |
add |
Type: Add Description: Output the sum of the two inputs |
Used in Examples (1)
 |
RotatingMachinery.Examples.ContactAnalysis Study of contact forces between a disk and a housing |