WOLFRAM SYSTEM MODELER
DCVE42Electrically actuated proportional control valve with four ports and two states |
 |
Diagram
Wolfram Language
In[1]:=
SystemModel["Hydraulic.Valves.DirectionalControl.ConventionalSolenoidActuation.DCVE42"]
Out[1]:=
Information
This is a model of a control valve with four ports and two states. The valve has a tank port t, a pressure port p, and two load ports a and b. The insignal to the spool is u. The valve is controlled by an electrical spool with dynamics; see SpoolE2Windings.
Control valve with four ports and two states
Valve with no overlap at the center position. At the center position, there is flow from a to t and from p to b.
Valve at left position, u = 1; there is flow from p to a and from b to t
Control valve with four ports and two states
Valve with no overlap at the center position. At the center position, there is flow from a to t and from p to b.
Valve at left position, u = 1; there is flow from p to a and from b to t
Implementation
This valve basically consists of orifices controlled by a spool.Parameters (9)
| medium |
Value: Oil() Type: Medium Description: Medium in the component |
|---|---|
| V |
Value: 0.0001 Type: Volume (m³) Description: Volume of control valve |
| Gleak |
Value: 1e-020 Type: PressureDependentLeakage (m³/(s⋅Pa)) Description: Leakage between orifices |
| overlap |
Value: 0 Type: Length (m) Description: Spool overlap, a number between -1 and 1; 0 if no overlap |
| AMax |
Value: 0.001 Type: Area (m²) Description: Maximum opening area |
| Cd |
Value: 0.62 Type: Real Description: Coefficient of discharge for the opening |
| Un |
Value: 1 Type: Voltage (V) Description: Spool nominal voltage |
| f |
Value: 80 Type: Frequency (Hz) Description: Spool resonance frequency |
| d |
Value: 0.9 Type: Damping (s⁻¹) Description: Spool damping |
Connectors (5)
 |
port_p |
Type: Port_a Description: Port for hydraulic fluid (filled icon) |
|---|---|---|
|
port_t |
Type: Port_a Description: Port for hydraulic fluid (filled icon) |
 |
port_b |
Type: Port_b Description: Port for hydraulic fluid (unfilled icon) |
|
port_a |
Type: Port_b Description: Port for hydraulic fluid (unfilled icon) |
 |
u |
Type: RealInput Description: 'input Real' as connector |
Components (11)
 |
medium |
Type: Medium Description: Medium in the component |
|---|---|---|
 |
volume_a |
Type: Volume Description: Fixed volume with fluid storage |
|
volume_b |
Type: Volume Description: Fixed volume with fluid storage |
|
volume_t |
Type: Volume Description: Fixed volume with fluid storage |
|
volume_p |
Type: Volume Description: Fixed volume with fluid storage |
 |
midlleState |
Type: CrossOver4Port Description: Basic building block for directional control valves |
 |
leftState |
Type: Straight4Port Description: Basic building block for directional control valves |
 |
abs1 |
Type: Abs Description: Output the absolute value of the input |
 |
add1 |
Type: Add Description: Output the sum of the two inputs |
 |
const |
Type: Constant Description: Generate constant signal of type Real |
 |
spool |
Type: SpoolE Description: An electrical spool with second-order characteristics |
Used in Examples (1)
 |
Hydraulic.Examples.MultipleActuators Example circuit with a sub-circuit operating at a reduced pressure |