WOLFRAM SYSTEM MODELER
SubCircuitWithReducedPressureExample circuit with a sub-circuit operating at a reduced pressure |
![]() |
SystemModel["Hydraulic.Examples.MultipleActuators.SubCircuitWithReducedPressure"]
![]() |
medium |
Type: Medium Description: Medium in the component |
---|---|---|
![]() |
tank1 |
Type: Tank Description: Simple tank with constant pressure |
![]() |
cylinderDouble1 |
Type: CylinderDouble Description: Double cylinder model |
![]() |
cylinderDouble2 |
Type: CylinderDouble Description: Double cylinder model |
![]() |
checkValve |
Type: CheckValve Description: Check valve with lumped volumes |
![]() |
controlValve1 |
Type: DCVE43TandemCenter Description: Electrically actuated proportional control valve with four ports and three states |
![]() |
controlValve2 |
Type: DCVE42 Description: Electrically actuated proportional control valve with four ports and two states |
![]() |
pump |
Type: Pump Description: Model of a pump with fixed displacement and volumes |
![]() |
pressureReducingValve |
Type: PressureReducingValve Description: Pressure valve, controlled by the pressure difference between the ports |
![]() |
pressureReliefValve |
Type: PressureReliefValve Description: Pressure valve, controlled by the pressure difference between the ports |
![]() |
tank2 |
Type: Tank Description: Simple tank with constant pressure |
![]() |
tank3 |
Type: Tank Description: Simple tank with constant pressure |
![]() |
positionSensor1 |
Type: PositionSensor Description: Ideal sensor to measure the absolute position |
![]() |
positionSensor2 |
Type: PositionSensor Description: Ideal sensor to measure the absolute position |
![]() |
step1 |
Type: Step Description: Generate step signal of type Real |
![]() |
step2 |
Type: Step Description: Generate step signal of type Real |
![]() |
constantSpeed1 |
Type: ConstantSpeed Description: Constant speed, not dependent on torque |
![]() |
step3 |
Type: Step Description: Generate step signal of type Real |