WOLFRAM SYSTEM MODELER
DCVE43TandemCenterElectrically actuated proportional control valve with four ports and three states |
 |
Diagram
Wolfram Language
In[1]:=
SystemModel["Hydraulic.Valves.DirectionalControl.ConventionalSolenoidActuation.DCVE43TandemCenter"]
Out[1]:=
Information
This is a model of a control valve with four ports and three states. The valve has a tank port t, a pressure port p, and two load ports a and b. The insignals to the spools are u1 and u2. The valve is controlled by two electrical spools with dynamics; see SpoolE2Windings.
This valve is similar to DCVE43ClosedCenter; the only difference is the middle state. In this model, ports P-T are connected in the middle state. In the figure below, u = u1 - u2.
Control valve with four ports and three states
This valve is similar to DCVE43ClosedCenter; the only difference is the middle state. In this model, ports P-T are connected in the middle state. In the figure below, u = u1 - u2.
Control valve with four ports and three states
Implementation
This valve basically consists of orifices controlled by a spool.Parameters (9)
| medium |
Value: Oil() Type: Medium Description: Medium in the component |
|---|---|
| V |
Value: 0.0001 Type: Volume (m³) Description: Volume of control valve |
| Gleak |
Value: 1e-020 Type: PressureDependentLeakage (m³/(s⋅Pa)) Description: Leakage between orifices |
| overlap |
Value: 0 Type: Length (m) Description: Spool overlap, a number between -1 and 1; 0 if no overlap |
| AMax |
Value: 0.001 Type: Area (m²) Description: Maximum opening area |
| Cd |
Value: 0.62 Type: Real Description: Coefficient of discharge for the opening |
| Un |
Value: 1 Type: Voltage (V) Description: Spool nominal voltage |
| d |
Value: 0.9 Type: Damping (s⁻¹) Description: Spool damping |
| f |
Value: 80 Type: Frequency (Hz) Description: Spool resonance frequency |
Connectors (6)
 |
port_p |
Type: Port_a Description: Port for hydraulic fluid (filled icon) |
|---|---|---|
|
port_t |
Type: Port_a Description: Port for hydraulic fluid (filled icon) |
 |
port_b |
Type: Port_b Description: Port for hydraulic fluid (unfilled icon) |
|
port_a |
Type: Port_b Description: Port for hydraulic fluid (unfilled icon) |
 |
u1 |
Type: RealInput Description: 'input Real' as connector |
|
u2 |
Type: RealInput Description: 'input Real' as connector |
Components (13)
 |
medium |
Type: Medium Description: Medium in the component |
|---|---|---|
 |
volume_a |
Type: Volume Description: Fixed volume with fluid storage |
|
volume_b |
Type: Volume Description: Fixed volume with fluid storage |
|
volume_t |
Type: Volume Description: Fixed volume with fluid storage |
|
volume_p |
Type: Volume Description: Fixed volume with fluid storage |
 |
rightState |
Type: CrossOver4Port Description: Basic building block for directional control valves |
 |
leftState |
Type: Straight4Port Description: Basic building block for directional control valves |
 |
middleState |
Type: Tandem4Port Description: Basic building block for directional control valves |
 |
abs1 |
Type: Abs Description: Output the absolute value of the input |
 |
add1 |
Type: Add Description: Output the sum of the two inputs |
 |
const |
Type: Constant Description: Generate constant signal of type Real |
 |
spool |
Type: SpoolE2Windings Description: An electrical spool with second-order characteristics |
|
add |
Type: Add Description: Output the sum of the two inputs |
Used in Examples (3)
 |
Hydraulic.Examples.MultipleActuators Example circuit with a sub-circuit operating at a reduced pressure |
 |
Hydraulic.Examples.MultipleActuators Example circuit with two cylinders working in a sequence |
 |
Hydraulic.Examples.MultipleActuators Example circuit with two cylinders working in a sequence |