WOLFRAM SYSTEM MODELER
CheckValveStatic check valve |
 |
Diagram
Wolfram Language
In[1]:=
SystemModel["Hydraulic.Valves.DirectionalControl.Internal.CheckValve"]
Out[1]:=
Information
This is a static model of a check valve.
Limitations
This model does not contain lumped volumes, so it does not integrate the flow and compute the pressure at the ports.Parameters (7)
| medium |
Value: Oil() Type: Medium Description: Medium in the component |
|---|---|
| Gleak |
Value: 1e-020 Type: PressureDependentLeakage (m³/(s⋅Pa)) Description: Leakage between orifices |
| pMax |
Value: 100000.0 Type: Pressure (Pa) Description: Pressure when valve is fully open |
| pMin |
Value: 100 Type: Pressure (Pa) Description: Pressure when valve starts to open |
| A |
Value: 0.01 Type: Area (m²) Description: Opening area when opened |
| Cd |
Value: 0.62 Type: Real Description: Coefficient of discharge for the opening |
| t1 |
Value: 0.001 Type: Time (s) Description: Time constant for first-order system |
Connectors (2)
Components (3)
 |
medium |
Type: Medium Description: Medium in the component |
|---|---|---|
 |
restriction |
Type: ControlledOrifice Description: Controlled restriction |
 |
spool |
Type: SpoolH Description: Model of a hydraulic spool |
Used in Components (1)
 |
Hydraulic.Valves.DirectionalControl Check valve with lumped volumes |