WOLFRAM SYSTEM MODELER
PressureReducingValveStatic pressure reducing valve |
 |
Diagram
Wolfram Language
In[1]:=
SystemModel["Hydraulic.Valves.PressureControl.Internal.PressureReducingValve"]
Out[1]:=
Information
This is a static model of a pressure reducing valve.
Limitations
This model does not contain lumped volumes, so it does not integrate the flow and compute the pressure at the ports.Parameters (8)
| medium |
Value: Oil() Type: Medium Description: Medium in the component |
|---|---|
| Gleak |
Value: 1e-020 Type: PressureDependentLeakage (m³/s·Pa) Description: Leakage between orifices |
| Gbleed |
Value: 1e-010 Type: ConductanceOfLaminarResistance (m³/s·Pa) Description: Conductance of oil bleed passage |
| pMax |
Value: 21000000.0 Type: Pressure (Pa) Description: Pressure when valve is fully closed |
| pMin |
Value: 20000000.0 Type: Pressure (Pa) Description: Pressure when valve starts to close |
| t1 |
Value: 0.1 Type: Time (s) Description: Time constant for first-order system |
| AMax |
Value: 0.01 Type: Area (m²) Description: Maximum opening area |
| Cd |
Value: 0.62 Type: Real Description: Coefficient of discharge for the opening |
Connectors (2)
Components (8)
 |
medium |
Type: Medium Description: Medium in the component |
|---|---|---|
 |
flowAB |
Type: ControlledOrifice |
 |
spool |
Type: SpoolH |
 |
tank |
Type: Tank |
 |
add1 |
Type: Add |
 |
const |
Type: Constant |
 |
limiter |
Type: Limiter |
 |
oilBleedPassage |
Type: RestrictionLaminar |
Used in Components (1)
 |
Hydraulic.Valves.PressureControl Pressure valve, controlled by the pressure difference between the ports |