WOLFRAM SYSTEM MODELER
ExamplesExamples that demonstrate the usage of the Analog electrical components |
Cauer low pass filter with analog components |
|
Cauer low pass filter with operational amplifiers |
|
Cauer low-pass filter with operational amplifiers and switched capacitors |
|
Characteristic of ideal diodes |
|
Characteristic of ideal thyristors |
|
Chua's circuit, ns, V, A |
|
Simple NPN transistor amplifier circuit |
|
Heating MOS Inverter |
|
Heating NPN NOR Gate |
|
Heating PNP NOR Gate |
|
Resistor with simple thermal network |
|
Heating rectifier |
|
CMOS NAND Gate (see Tietze/Schenk, page 157) |
|
Example for Zener diodes |
|
B6 diode bridge |
|
Simple demo to show behaviour of SaturatingInductor component |
|
Simple demo of a VariableResistor model |
|
Comparison of switch models both with and without arc |
|
Thyristor demonstration example |
|
Transformer circuit to show the magnetization facilities |
|
Comparison of controlled switch models both with and without arc |
|
Simple triac test circuit |
|
Ideal triac test circuit |
|
Conversion circuit |
|
Inverting amplifier |
|
Series resonance circuit |
|
Parallel resonance circuit |
|
Examples with operational amplifiers |
|
Utility components used by package Examples |
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This package contains examples that demonstrate the usage of the components of the Electrical.Analog library.
The examples are simple to understand. They will show a typical behavior of the components, and they will give hints to users.
SystemModel["Modelica.Electrical.Analog.Examples"]