WOLFRAM SYSTEM MODELER

SpringDamperNoRelativeStates

Linear 1D rotational spring and damper in parallel (phi and w are not used as states)

Wolfram Language

In[1]:=
SystemModel["Modelica.Mechanics.Rotational.Examples.Utilities.SpringDamperNoRelativeStates"]
Out[1]:=

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

A spring and damper element connected in parallel. The component can be connected either between two masses to describe the joint elasticity and damping, or between a mass and the housing (component Fixed), to describe a coupling of the element with the housing via a spring/damper.

This is the same element as Rotational.Components.SpringDamper but with the only difference, that the relative quantities are not used as states. If the relative states are potentially used as states, "a_rel = der(w_rel)" is present, and then exporting this model as FMU requires to also have the accelerations in the flanges as inputs, which is usually not desired for a force element.

Parameters (4)

useHeatPort

Value: false

Type: Boolean

Description: = true, if heatPort is enabled

c

Value:

Type: RotationalSpringConstant (N⋅m/rad)

Description: Spring constant

d

Value:

Type: RotationalDampingConstant (N⋅m⋅s/rad)

Description: Damping constant

phi_rel0

Value: 0

Type: Angle (rad)

Description: Unstretched spring angle

Connectors (3)

flange_a

Type: Flange_a

Description: Left flange of compliant 1-dim. rotational component

flange_b

Type: Flange_b

Description: Right flange of compliant 1-dim. rotational component

heatPort

Type: HeatPort_a

Description: Optional port to which dissipated losses are transported in form of heat

Used in Components (1)

SpringDamper

Modelica.Mechanics.Rotational.Examples.Utilities

Input/output block of a spring/damper model