WOLFRAM SYSTEMMODELER

PlanarToMultiBody

This model enables to connect planar models to 3D Models

Wolfram Language

In[1]:=
SystemModel["PlanarMechanics.Interfaces.PlanarToMultiBody"]
Out[1]:=

Information

This component enables the connection between Planarmechanics and MultiBody.

The orientation and position of the 2D system within the 3D system are determined by the Multi-Body connector of the planar world model or zero rotation at zero position otherwise

The physical connection assumes the 2D world to be the root of the system, defining the orientation. All forces and torques acting outside the plane are assumed to be absorbed by the planar world system.. Beware! These forces are not transmitted by the Multi-Body connector of the planar world.

Parameters (1)

zPosition

Value: planarWorld.defaultZPosition

Type: Length (m)

Description: Position z of cylinder representing the fixed translation

Connectors (2)

frame_a

Type: Frame_a

Description: Frame connector in PlanarMechanics

frame_b

Type: Frame_b

Description: Frame connector in MultiBody

Components (1)

planarWorld

Type: PlanarWorld

Description: planar world model