WOLFRAM SYSTEM MODELER
HawkerSiddeleyHS121Trident3BNarrow-body turbofan airliner: Hawker Siddeley HS-121 Trident 3B |
SystemModel["Aircraft.Physical.FixedWing.HawkerSiddeleyHS121Trident3B"]
This model extends the AircraftBase model and contains the parameters of Hawker Siddeley HS-121 Trident 3B.
The values of moments and the xz-product of inertia are guessed based on the known aircraft size and mass.
Due to the special propulsion configuration of the aircraft, a custom propulsion model is built to this model.
[1] Wikipedia. (2022). Hawker Siddeley Trident. [online]
Available at: https://en.wikipedia.org/wiki/Hawker_Siddeley_Trident#Specifications [Accessed 24 Oct. 2022].
[2] Pinterest. HS TRident 3B - speedjack livery | British european airways, Trident, Vintage aircraft. [online]
Available at: https://www.pinterest.co.uk/pin/hs-trident-3b-speedjack-livery--822188475698562886/ [Accessed 24 Oct. 2022].
weightEst |
Value: false Type: Boolean Description: true, if weight estimation method is used for masses, center of mass location and inertia tensor |
---|---|
mDry |
Value: 48141.2 Type: Mass (kg) Description: Aircraft dry mass (total mass for electric aircraft and gliders) |
initialMfuel |
Value: 19858.8 Type: Mass (kg) Description: Initial fuel mass |
xCMdry |
Value: -1.2 Type: Length (m) Description: Aircraft center of mass x-coordinate w.r.t. fuselage reference point (with total mass for electric aircraft and gliders, positive x-axis towards nose) |
yCMdry |
Value: 0 Type: Length (m) Description: Aircraft center of mass y-coordinate w.r.t. fuselage reference point (with total mass for electric aircraft and gliders, positive y-axis towards right) |
zCMdry |
Value: 0.1 Type: Length (m) Description: Aircraft center of mass z-coordinate w.r.t. fuselage reference point (with total mass for electric aircraft and gliders, positive z-axis towards ground) |
IxxDry |
Value: 1500000 Type: MomentOfInertia (kg⋅m²) Description: Aircraft moment of inertia about x-axis (with total mass for electric aircraft and gliders) |
IyyDry |
Value: 2500000 Type: MomentOfInertia (kg⋅m²) Description: Aircraft moment of inertia about y-axis (with total mass for electric aircraft and gliders) |
IzzDry |
Value: 4000000 Type: MomentOfInertia (kg⋅m²) Description: Aircraft moment of inertia about z-axis (with total mass for electric aircraft and gliders) |
IxyDry |
Value: 0 Type: MomentOfInertia (kg⋅m²) Description: Aircraft xy-product of moment of inertia (with total mass for electric aircraft and gliders) |
IxzDry |
Value: 100000 Type: MomentOfInertia (kg⋅m²) Description: Aircraft xz-product of moment of inertia (with total mass for electric aircraft and gliders) |
IyzDry |
Value: 0 Type: MomentOfInertia (kg⋅m²) Description: Aircraft yz-product of moment of inertia (with total mass for electric aircraft and gliders) |
MTOMdes |
Value: 68000 Type: Mass (kg) Description: Design maximum take-off mass |
nPax |
Value: 180 Type: Integer Description: Design number of passengers |
mPLdes |
Value: 17136 Type: Mass (kg) Description: Design payload mass |
machDes |
Value: 0.84 Type: Real Description: Design Mach number |
compMat |
Value: false Type: Boolean Description: true, if composite materials are used in structures |
qMax |
Value: 15000 Type: Pressure (Pa) Description: Maximum dynamic pressure |
nMax |
Value: 2.5 Type: Real Description: Maximum load factor |
nEng |
Value: 4 Type: Integer Description: Number of engines |
wingMounted |
Value: if nEng == 0 then false else propulsion.wingMounted Type: Boolean |
engineType |
Value: if nEng == 0 then 4 else propulsion.engineType Type: Integer |
lFus |
Value: 37.08 Type: Length (m) Description: Fuselage length |
wFus |
Value: 3.7 Type: Length (m) Description: Fuselage maximum width |
hFus |
Value: 3.7 Type: Length (m) Description: Fuselage maximum height |
dFusHT |
Value: 1.6 Type: Length (m) Description: Fuselage diameter at horizontal tail 1/4 chord |
bWing |
Value: 30 Type: Length (m) Description: Main wing span |
cWingRoot |
Value: 8.0 Type: Length (m) Description: Main wing root chord (where wing intersects with fuselage) |
cWingTip |
Value: 2.1 Type: Length (m) Description: Main wing tip chord |
tWingRoot |
Value: 0.9 Type: Length (m) Description: Main wing root thickness |
tWingTip |
Value: 0.18 Type: Length (m) Description: Main wing tip thickness |
xWingRootLE |
Value: 1.9 Type: Length (m) Description: Main wing root leading edge x-coordinate w.r.t. fuselage reference point (positive x-axis towards nose) |
zWingRootLE |
Value: 1.0 Type: Length (m) Description: Main wing root leading edge z-coordinate w.r.t. fuselage reference point (positive z-axis towards ground) |
lambdaWing |
Value: 0.610865238198015 Type: Angle (rad) Description: Main wing sweep angle at 1/4 chord |
gammaWing |
Value: 0.0628318530717959 Type: Angle (rad) Description: Main wing dihedral angle |
iWing |
Value: 0.0523598775598299 Type: Angle (rad) Description: Main wing incidence angle |
cAil |
Value: 1 Type: Length (m) Description: Aileron average chord |
yAilRoot |
Value: 9.0 Type: Length (m) Description: Aileron root y-coordinate w.r.t. fuselage centerline |
yAilTip |
Value: 11.9 Type: Length (m) Description: Aileron tip y-coordinate w.r.t. fuselage centerline |
bHT |
Value: 10.5 Type: Length (m) Description: Horizontal tail span |
cHTroot |
Value: 4.1 Type: Length (m) Description: Horizontal tail root chord |
cHTtip |
Value: 1.5 Type: Length (m) Description: Horizontal tail tip chord |
tHTroot |
Value: 0.7 Type: Length (m) Description: Horizontal tail root thickness |
tHTtip |
Value: 0.3 Type: Length (m) Description: Horizontal tail tip thickness |
xHTrootLE |
Value: -15.6 Type: Length (m) Description: Horizontal tail root leading edge x-coordinate w.r.t. fuselage reference point (positive x-axis towards nose) |
zHTrootLE |
Value: -5.2 Type: Length (m) Description: Horizontal tail root leading edge z-coordinate w.r.t. fuselage reference point (positive z-axis towards ground) |
lambdaHT |
Value: 0.523598775598299 Type: Angle (rad) Description: Horizontal tail sweep angle at 1/4 chord |
iHT |
Value: 0 Type: Angle (rad) Description: Horizontal tail incidence angle |
Selv |
Value: 7 Type: Area (m²) Description: Elevator area |
bVT |
Value: 4.9 Type: Length (m) Description: Vertical tail span |
cVTroot |
Value: 5.6 Type: Length (m) Description: Vertical tail root chord |
cVTtip |
Value: 4.3 Type: Length (m) Description: Vertical tail tip chord |
tVTroot |
Value: 0.5 Type: Length (m) Description: Vertical tail root thickness |
tVTtip |
Value: 0.5 Type: Length (m) Description: Vertical tail tip thickness |
xVTrootLE |
Value: -12.7 Type: Length (m) Description: Vertical tail root leading edge x-coordinate w.r.t. fuselage reference point (positive x-axis towards nose) |
zVTroot |
Value: -1.5 Type: Length (m) Description: Vertical tail root z-coordinate w.r.t fuselage reference point |
lambdaVT |
Value: 0.523598775598299 Type: Angle (rad) Description: Vertical tail sweep angle at 1/4 chord |
Srdr |
Value: 4.7 Type: Area (m²) Description: Rudder area |
kSkinAC |
Value: 6.35e-06 Type: Length (m) Description: Surface roughness height (same value to be used for all components) |
kSkinFus |
Value: kSkinAC Type: Length (m) Description: Fuselage surface roughness height |
kSkinWing |
Value: kSkinAC Type: Length (m) Description: Main Wing surface roughness height |
ClAlphaWing2D |
Value: 4 Type: CurveSlope (rad⁻¹) Description: Change in the section lift coefficient of the main wing airfoil (2D) due to alpha |
alpha0Wing2D |
Value: -0.0349065850398866 Type: Angle (rad) Description: Zero-lift angle of attack of the main wing airfoil (2D) |
ClMaxWing2D |
Value: 1.5 Type: Real Description: Maximum section lift coefficient of the main wing airfoil (2D) |
kSkinHT |
Value: kSkinAC Type: Length (m) Description: Horizontal tail surface roughness height |
ClAlphaHT2D |
Value: 4 Type: CurveSlope (rad⁻¹) Description: Change in the section lift coefficient of the horizontal tail airfoil (2D) due to alpha |
alpha0HT2D |
Value: 0 Type: Angle (rad) Description: Zero-lift angle of attack of the horizontal tail airfoil (2D) |
ClMaxHT2D |
Value: 1.5 Type: Real Description: Maximum section lift coefficient of the horizontal tail airfoil (2D) |
kSkinVT |
Value: kSkinAC Type: Length (m) Description: Vertical tail surface roughness height |
ClAlphaVT2D |
Value: 4 Type: CurveSlope (rad⁻¹) Description: Change in the section lift coefficient of the vertical tail airfoil (2D) due to alpha |
deltaElvMax |
Value: 0.392699081698724 Type: Angle (rad) Description: Maximum elevator deflection |
deltaAilMax |
Value: 0.392699081698724 Type: Angle (rad) Description: Maximum aileron deflection |
deltaRdrMax |
Value: 0.785398163397449 Type: Angle (rad) Description: Maximum rudder deflection |
sigmaBeta |
Value: max(3.06 * (SrefVT / SrefWing) / (1 + cos(lambdaWing)) + 0.4 * (-tan(gammaWing) * (yWingAC - wFus / 2) + zWingRootLE) / wFus + 0.009 * (bWing ^ 2 / SrefWing) - 0.276, 0) Type: Real Description: Change in sidewash due to beta |
rACcm |
Value: if weightEst then {xWingRootLE - lambdaWingLE * (yWingAC - wFus / 2) - 0.15 * cWingMean, 0, 0} else {xCMdry, yCMdry, zCMdry} Type: Length[3] (m) Description: Aircraft dry center of mass w.r.t. fuselage reference point (estimated to be at 15% of MAC if weight estimation method is used) |
Cfus |
Value: Modelica.Constants.pi * (3 * (hFus / 2 + wFus / 2) - sqrt(10 * hFus / 2 * wFus / 2 + 3 * ((hFus / 2) ^ 2 + (wFus / 2) ^ 2))) Type: Length (m) Description: Fuselage circumference |
SwetFus |
Value: Cfus * lFus * (1 - 2 / (lFus / (Cfus / Modelica.Constants.pi))) ^ (2 / 3) * (1 + 1 / (lFus / (Cfus / Modelica.Constants.pi)) ^ 2) Type: Area (m²) Description: Fuselage wetted area |
FFfus |
Value: 1 + 0.0025 * (lFus / hFus) + 60 * (hFus / lFus) ^ 3 Type: Real Description: Fuselage form factor |
CDmaxFus |
Value: 0.8 * lFus * hFus / SrefWing Type: Real Description: Maximum drag coefficient of the fuselage |
nSeatAbs |
Value: if nPax > 180 then floor(0.9 * wFus / 0.5588) - 1 else floor(0.9 * wFus / 0.5588) Type: Real Description: Number of seats abreast |
SrefWing |
Value: 135.8 Type: Area (m²) Description: Main wing reference area |
ARwing |
Value: bWing ^ 2 / SrefWing Type: Real Description: Main wing aspect ratio |
TRwing |
Value: cWingTip / cWingRoot Type: Real Description: Main wing taper ratio |
cWingMean |
Value: 2 / 3 * cWingRoot * ((1 + TRwing + TRwing ^ 2) / (1 + TRwing)) Type: Length (m) Description: Main wing mean chord length |
tWingMean |
Value: (yWingAC - wFus / 2) * (tWingTip - tWingRoot) / (bWing / 2 - wFus / 2) + tWingRoot Type: Length (m) Description: Main wing mean thickness |
tauWing |
Value: tWingTip / cWingTip / (tWingRoot / cWingRoot) Type: Real Description: Ratio of thickness-to-chord ratios at the main wing tip and root |
xWingAC |
Value: -0.25 * cWingMean Type: Length (m) Description: Main wing aerodynamic center from wing leading edge at mean chord (positive x-axis towards nose) |
yWingAC |
Value: (cWingRoot - cWingMean) / (cWingRoot - cWingTip) * (bWing - wFus) / 2 + wFus / 2 Type: Length (m) Description: Main wing aerodynamic center from fuselage centerline (y-coordinate w.r.t. fuselage centerline of mean chord) |
SwetWing |
Value: 2 * (SrefWing / cos(gammaWing) - cWingRoot * wFus) * (1 + 0.25 * (tWingRoot / cWingRoot) * (1 + tWingTip / cWingTip / (tWingRoot / cWingRoot) * TRwing) / (1 + TRwing)) Type: Area (m²) Description: Main wing wetted area |
lambdaWingLE |
Value: atan((cWingRoot / 4 - cWingTip / 4 + tan(lambdaWing) * bWing / 2) / (bWing / 2)) Type: Angle (rad) Description: Main wing leading edge sweep angle |
lambdaWingHC |
Value: atan((cWingTip / 4 - cWingRoot / 4 + tan(lambdaWing) * bWing / 2) / (bWing / 2)) Type: Angle (rad) Description: Main wing half-chord sweep angle |
lambdaWingTE |
Value: atan((lambdaWingLE * ((bWing - wFus) / 2) + cWingTip - cWingRoot) / ((bWing - wFus) / 2)) Type: Angle (rad) Description: Main wing trailing edge sweep angle (at ailerons location) |
CLmaxWing3D |
Value: 0.9 * ClMaxWing2D * cos(lambdaWing) Type: Real Description: Maximum lift coefficient of the main wing (3D) |
CDmaxWing3D |
Value: 1.98 - 0.81 * (1 - Modelica.Constants.e ^ (-20 / ARwing)) Type: Real Description: Maximum drag coefficient of the main wing (3D) |
FFwing |
Value: 0.421 * (2 + 4 * tWingMean / cWingMean + 240 * (tWingMean / cWingMean) ^ 4) Type: Real Description: Main wing form factor |
sdWing |
Value: 0.9998 + 0.0421 * (wFus / bWing) - 2.6286 * (wFus / bWing) ^ 2 + 2 * (wFus / bWing) ^ 3 Type: Real Description: Fuselage drag factor for main wing |
kdWing |
Value: -3.333 * 10 ^ (-4) * lambdaWing ^ 2 + 6.667 * 10 ^ (-5) * lambdaWing + 0.38 Type: Real Description: Empirical constant for Oswald efficiency factor for main wing |
Sail |
Value: cAil * (yAilTip - yAilRoot) * 2 Type: Area (m²) Description: Aileron area (of both wings) |
xAilAC |
Value: -(xCMdry - (xWingRootLE - lambdaWingLE * (yWingAC - wFus / 2))) - 0.25 * cWingMean - tan(lambdaWing) * ((yAilRoot + yAilTip) / 2 - yWingAC) - (cAilWingRoot + cAilWingTip) / 2 * 0.75 + cAil / 4 Type: Length (m) Description: Aileron aerodynamic center x-coordinate w.r.t. aircraft center of mass |
yAilAC |
Value: (yAilRoot + yAilTip) / 2 Type: Length (m) Description: Aileron aerodynamic center y-coordinate w.r.t. fuselage centerline |
cAilWingRoot |
Value: 4.1 Type: Length (m) Description: Local main wing chord at aileron root |
cAilWingTip |
Value: 3.2 Type: Length (m) Description: Local main wing chord at aileron tip |
kCnDeltaAil |
Value: -0.350894 - 0.066355 * (yAilRoot / (bWing / 2)) ^ 4.15179 + 0.029308 * (bWing ^ 2 / SrefWing) Type: Real Description: Empirical factor for the yaw moment derivative due to ailerons |
tauAil |
Value: 1.129 * (Sail / SrefWing) ^ 0.4044 - 0.1772 Type: Real Description: Aileron effectiveness parameter |
SrefHT |
Value: (cHTroot + cHTtip) * (bHT - dFusHT) / 2 + cHTroot * dFusHT Type: Area (m²) Description: Horizontal tail reference area |
ARht |
Value: bHT ^ 2 / SrefHT Type: Real Description: Aspect ratio of horizontal tail |
TRht |
Value: cHTtip / cHTroot Type: Real Description: Taper ratio of horizontal tail |
cHTmean |
Value: 2 / 3 * cHTroot * (1 + TRht + TRht ^ 2) / (1 + TRht) Type: Length (m) Description: Horizontal tail mean chord |
tHTmean |
Value: bHT / 2 * (1 + 2 * TRht) / (3 + 3 * TRht) * (tHTtip - tHTroot) / (bHT / 2 - dFusHT / 2) + tHTroot Type: Length (m) Description: Horizontal tail mean thickness |
lHTcm |
Value: abs(xHTrootLE - xCMdry - tan(lambdaHTle) * (bHT / 2 - dFusHT / 2) * (1 + 2 * TRht) / (3 + 3 * TRht) - 0.25 * cHTmean) Type: Length (m) Description: Horizontal tail arm length (from aircraft center of mass to horizontal tail 1/4 chord) |
lHTwingAC |
Value: abs(xHTrootLE - (xWingRootLE - lambdaWingLE * (yWingAC - wFus / 2))) + tan(lambdaHTle) * (bHT / 2 - dFusHT / 2) * (1 + 2 * TRht) / (3 + 3 * TRht) + 0.25 * cHTmean - abs(xWingAC) Type: Length (m) Description: Horizontal tail arm length (from wing aerodynamic center to horizontal tail 1/4 chord) |
vHT |
Value: SrefHT / SrefWing * (lHTcm / cWingMean) Type: Real Description: Horizontal tail volume coefficient |
SwetHT |
Value: 2 * (SrefHT - cHTroot * dFusHT) * (1 + 0.25 * (tHTroot / cHTroot) * (1 + tHTtip / cHTtip / (tHTroot / cHTroot) * TRht) / (1 + TRht)) Type: Area (m²) Description: Horizontal tail wetted area |
lambdaHTle |
Value: atan((cHTroot / 4 - cHTtip / 4 + tan(lambdaHT) * bHT / 2) / (bHT / 2)) Type: Angle (rad) Description: Horizontal tail leading edge sweep angle |
CLmaxHT3D |
Value: 0.9 * ClMaxHT2D * cos(lambdaHT) Type: Real Description: Maximum lift coefficient of the horizontal tail (3D) |
CDmaxHT3D |
Value: 1.98 - 0.81 * (1 - Modelica.Constants.e ^ (-20 / ARht)) Type: Real Description: Maximum drag coefficient of the horizontal tail (3D)*(SrefHT/SrefWing) |
FFht |
Value: 1 + 0.1 * (1 - 0.893 * abs(zHTrootLE / hFus)) * (2 + 4 * tHTmean / cHTmean + 240 * (tHTmean / cHTmean) ^ 4) Type: Real Description: Horizontal tail form factor |
sdHT |
Value: 0.9998 + 0.0421 * (dFusHT / bHT) - 2.6286 * (dFusHT / bHT) ^ 2 + 2 * (dFusHT / bHT) ^ 3 Type: Real Description: Fuselage drag factor for horizontal tail |
kdHT |
Value: -3.333 * 10 ^ (-4) * lambdaHT ^ 2 + 6.667 * 10 ^ (-5) * lambdaHT + 0.38 Type: Real Description: Empirical constant for Oswald efficiency factor for horizontal tail |
tauElv |
Value: 1.129 * (Selv / SrefHT) ^ 0.4044 - 0.1772 Type: Real Description: Elevator effectiveness parameter |
SrefVT |
Value: (cVTroot + cVTtip) / 2 * bVT Type: Area (m²) Description: Vertical tail reference area |
ARvt |
Value: bVT ^ 2 / SrefVT Type: Real Description: Aspect ratio of vertical tail |
TRvt |
Value: cVTtip / cVTroot Type: Real Description: Taper ratio of vertical tail |
cVTmean |
Value: 2 / 3 * cVTroot * (1 + TRvt + TRvt ^ 2) / (1 + TRvt) Type: Length (m) Description: Vertical tail mean chord |
tVTmean |
Value: bVT * (1 + 2 * TRvt) / (3 + 3 * TRvt) * (tVTtip - tVTroot) / bVT + tVTroot Type: Length (m) Description: Vertical tail mean thickness |
lVTcm |
Value: abs(xVTrootLE - xCMdry - tan(lambdaVTle) * bVT * (1 + 2 * TRvt) / (3 + 3 * TRvt) - 0.25 * cVTmean) Type: Length (m) Description: Vertical tail arm length (from aircraft center of mass to vertical tail 1/4 chord) |
lVTwingAC |
Value: abs(xVTrootLE - (xWingRootLE - lambdaWingLE * (yWingAC - wFus / 2))) + tan(lambdaVTle) * bVT * (1 + 2 * TRvt) / (3 + 3 * TRvt) + 0.25 * cVTmean - abs(xWingAC) Type: Length (m) Description: Vertical tail arm length (from wing aerodynamic center to vertical tail aerodynamic center) |
zVTac |
Value: zVTroot - bVT * (1 + 2 * TRvt) / (3 + 3 * TRvt) Type: Length (m) Description: Vertical tail center of pressure z-coordinate w.r.t. fuselage reference point |
vVT |
Value: SrefVT / SrefWing * (lVTcm / bWing) Type: Real Description: Vertical tail volume coefficient |
SwetVT |
Value: 2 * SrefVT * (1 + 0.25 * (tVTroot / cVTroot) * (1 + tVTtip / cVTtip / (tVTroot / cVTroot) * TRvt) / (1 + TRvt)) Type: Area (m²) Description: Vertical tail wetted area |
lambdaVTle |
Value: atan((tan(lambdaVT) * bVT - cVTtip / 4 + cVTroot / 4) / bVT) Type: Angle (rad) Description: Vertical tail leading edge sweep angle |
FFvt |
Value: 0.5 * (2 + 4 * tVTmean / cVTmean + 240 * (tVTmean / cVTmean) ^ 4) Type: Real Description: Vertical tail form factor |
sdVT |
Value: 0.9998 Type: Real Description: Fuselage drag factor for vertical tail |
kdVT |
Value: -3.333 * 10 ^ (-4) * lambdaVT ^ 2 + 6.667 * 10 ^ (-5) * lambdaVT + 0.38 Type: Real Description: Empirical constant for Oswald efficiency factor for vertical tail |
tauRdr |
Value: 1.129 * (Srdr / SrefVT) ^ 0.4044 - 0.1772 Type: Real Description: Rudder effectiveness parameter |
initialAltitude |
Value: 0 Type: Height (m) Description: Initial altitude |
initialLatPosition |
Value: {0, 0} Type: Position[2] (m) Description: Initial lateral position of the aircraft (x and y coordinates in world frame) |
initialVelocity |
Value: 0 Type: Velocity (m/s) Description: Initial velocity |
initialTrack |
Value: 0 Type: Angle (rad) Description: Initial track angle |
initialGamma |
Value: 0 Type: Angle (rad) Description: Initial flight path angle |
initialPhi |
Value: 0 Type: Angle (rad) Description: Initial roll angle |
initialTheta |
Value: 0 Type: Angle (rad) Description: Initial pitch angle |
initialPsi |
Value: 0 Type: Angle (rad) Description: Initial yaw angle (heading) |
initialAngularVelocity |
Value: {0, 0, 0} Type: AngularVelocity[3] (rad/s) Description: Initial {roll [p], pitch [q], yaw [r]} |
CADshapes |
Value: false Type: Boolean Description: true, if external CAD files are used for animation |
CADpath |
Value: "modelica://Aircraft/Resources/CAD/PathName.obj" Type: String Description: Path for CAD file |
T0 |
Value: atmos.T0 Type: Temperature (K) Description: Temperature at sea-level |
rho0 |
Value: atmos.mAir * p0 / (atmos.R0 * T0) Type: Density (kg/m³) Description: Air density at sea-level |
p0 |
Value: atmos.p0 Type: Pressure (Pa) Description: Static pressure at sea-level |
a0 |
Value: sqrt(atmos.gammaAir * atmos.R0 / atmos.mAir * T0) Type: Velocity (m/s) Description: Speed of sound at sea-level |
gammaAir |
Value: atmos.gammaAir Type: Real Description: Adiabatic index for air |
xEtot |
Type: Real Description: State of aircraft total energy |
---|
deltaAilCmd |
Type: RealInput Description: Ailerons deflection command |
|
---|---|---|
deltaElvCmd |
Type: RealInput Description: Elevator deflection command |
|
deltaRdrCmd |
Type: RealInput Description: Rudder deflection command |
|
deltaThrot1Cmd |
Type: RealInput Description: Engine 1 throttle command |
|
deltaThrot2Cmd |
Type: RealInput Description: Engine 2 throttle command |
|
deltaThrot3Cmd |
Type: RealInput Description: Engine 3 throttle command |
|
deltaThrot4Cmd |
Type: RealInput Description: Engine 4 throttle command |
|
deltaThrot5Cmd |
Type: RealInput Description: Engine 5 throttle command |
|
aircraftRP |
Type: Frame_b Description: Connector to aircraft reference point |
|
flightDataOut |
Type: FlightDataOut Description: Flight data output |
|
deltaThrotCmd |
Type: RealInput[nEng] Description: Engine throttle commands when custom propulsion is used |
atmos |
Type: AtmosphericProperties Description: Property parameters for the U.S. Standard Atmosphere |
|
---|---|---|
flightData |
Type: FlightData Description: Global flight data variables (measured at the aircraft center of mass location) |
|
body |
Type: Body Description: Model for the mass properties of entire aircraft or only fuselage, landing gear and payload if weight estimation method is used |
|
propulsion |
Type: HS121Trident3Bpropulsion Description: Propulsion model |
|
surfaces |
Type: Conventional Description: Model of system of surfaces in conventional wing configuration |
Aircraft.Examples Example of flying an aircraft with custom propulsion and engine failure |